Amines & Plasticizers Limited
AN ISO-9001-2008, ISO-14001-2004 & OHSAS-18001-2007 CERTIFIED COMPANY CIN Number L24229AS1973PLC001446

Neutrasol® HSAS Neutralizers


TECHNICAL SPECIFICATIONS OF NEUTRASOL®
Specification

Appearance: Clear Liquid
Assay as NEUTRASOL®: 34% Min
Water: 66% Max
Colour: 100 APHA Max
Odour: Mild
Solubility in water: Completely miscible
pH : > 11.5



Applications

Used as Gas Treatment agent



Packing:

Available in road tankers, bulk containers or mild steel drums containing 230 kg. Net. 1 x 20’FCL = 80 drums of 230 Kgs Nett. wt.



Health and Safety:

Liquid has irritant effect on skin and may cause serious eye damage. Vapor is harmful and inhalation has irritant effect on eyes.



Protective devices:

Goggles giving complete protection to eyes. Plastic or synthetic rubber gloves. Eyewash bottle with clean water. Suitable respiratory device when necessary.



Action in case of spillage:

Completely contain spilled material with dikes, sandbags, etc. Keep out of water supplies and sewers. Liquid material may be removed with a properly rated vacuum truck. Flush spill area with water, if appropriate. Releases should be reported, if required, to appropriate agencies.



First Aid :



Inhalation

Remove to fresh air.



Eye Contact

Immediately flush eyes with a directed stream of water for at least 15 minutes, forcibly holding eyelids apart to ensure complete relief from irritation of all eye and lid tissues. Washing eyes within several seconds is essential to achieve maximum effectiveness. GET MEDICAL ATTENTION IMMEDIATELY.



Skin Contact

Remove contaminated clothing. Wash skin with soap and water. Obtain medical attention if contact has been widespread and prolonged, or if irritation persists. Wash clothing before reuse.



Ingestion

If swallowed, do not induce vomiting. Rinse mouth out with water. Give water. Never give anything by mouth to an unconscious or convulsive person. If vomiting occurs spontaneously, keep airway clear. GET MEDICAL ATTENTION IMMEDIATELY.



NEUTRASOL® is Registered Trademark of Amines and Plasticizers Ltd, India.


Disclaimer

The information contained herein based on the present states of our knowledge and does not therefore guarantee certain properties. Recipients of our products must take responsibility for observing existing proprietary rights, laws and regulations. Further, the data on physical properties presented above have been compiled from our own measurements or taken from printed literature and the values quoted are not binding for our products.